As of November 2026, national cost guides put most installed fences between roughly $8 and $55 per linear foot, depending on material, and block walls around $15 to $20 per square foot of wall face. We did not find a reliable, dated price survey for Peoria alone. Local labor, access, slope and permits move the number, so a measured, itemized estimate is the price that counts.
What does each material cost?
| Material | Range | Source |
|---|---|---|
| Chain link | About $8 to $40 | NerdWallet |
| Wood privacy, 6 ft | About $13 to $45 | Inch Calculator |
| Vinyl | About $15 to $40 | NerdWallet |
| Aluminum | About $20 to $55 | Inch Calculator |
| Wrought iron | About $25 to $55 | NerdWallet |
| Concrete block wall | About $15 to $20 per square foot of wall face | Inch Calculator |
These are national figures, not bids for Peoria homes.
What moves the price on a Peoria job?
- Height and footing. Taller walls need bigger footings and more steel.
- Caliche and slope. Hard ground and foothill lots add excavation time.
- Finish. Stucco and paint matched to HOA colors cost more than plain block.
- RV gate openings. Cutting an existing wall and building pilasters adds labor.
- Access. Getting block and grout into a back yard with no side access.
How do I get a firm number?
Measure the run roughly, decide on height and the number of gates, and note whether an old fence or wall is coming out. Then ask for an estimate that prices each of those as its own line.
Sources: see the table above.
Updated November 2026